Gary's Uke
9 3/20 New molds for the cutaway and non cutaway sides
New bending form for the cutaway side of your traditional shape uke.
9/7/20 Not so good photos of the top and back. Back is much nicer than it looks in the photo. I usually like to take photos at night so that I can control the light, but with this project I'm just doing them as they come.
9/8/20 Gluing the braces with a Go-Bar deck. The clamps are spring load to apply pressure.
Installing the kerfing 9/10/2020
Shaving the bracing
Sanding the top and back edges of the sides in a spherical sanding dish. Top has a 25' radius and the back gets sanded with a 12' spherical dish. Video
Gluing the top on, upside down, using shop made bedspring clamps
